| Subcategories |
 |
Accessories |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Lamello 144020 #20 Beechwood Biscuits / Plates 1000-Pieces
Studio : Lamello
by Lamello
Brand : Lamello
Model : 144020
Publisher : Lamello
Availability : Usually ships in 1-2 business days
EAN : 7640108025142
Avg. Customer Rating: (based on 2 reviews)
List Price : $47.95
Our Price : $43.73
|
|
| |
-
100% Harvested Beechwood
-
Defect rate of .0013% (Would find one defective biscuit out of 13,000) means No waste
-
Surface designed to allow uniform glue allocation-High tensile strength
-
Flat ends: guarantees excess glue remains inside the groove. Cross ribs for easy insertion
-
True to size in length and thickness. Clearly embossed brand name "Lamello"
|
|
| |
|
Lamello biscuits review |
|
Several years ago, I wondered if my Porter-Cable biscuit joiner was wearing out. I started checking the Porter-Cable biscuits that I had with a micrometer. The biscuit thicknesses were all over the place. Not very consistent. Lamello biscuits are consistently the same thickness every time I pick one up. I don't worry about loose joints anymore. They work good and I will continue using them. |
| |
|
A good biscuit |
|
These Lamello biscuits are pretty good. As a professional woodworker go through a few thousand of these things a year and so far these are the best I've used. There is some slight variation in thickness and occasionally one will be too tight to fit into the slot with hand pressure alone... however the variation is probably a result of the compression process and may in fact be unavoidable. The best part though is that NONE of the biscuits have splinters! The entire biscuit is smooth and the edges seem to be sanded. The last box of Porter Cable biscuits I used had splinters that stuck out (caused by the compression process), and these splinters would catch on the edge of the joint and actually prevent the joint from closing tightly... as a result I had to hand inspect each one (quite a pain when using thousands of them) These Lamello ones do not have that problem and I can grab them right out of the box and put them in the slots. |
| |
|
|
|
