|
|
Wolfcraft 4525 Drill Guide Attachment for 1/4-Inch or 3/8-Inch Drills
Studio : Wolfcraft
by Wolfcraft
Brand : Wolfcraft
Model : 4525404
Publisher : Wolfcraft
Availability : Usually ships in 1-2 business days
EAN : 0025104452500
UPC : 025104452500
Avg. Customer Rating: (based on 10 reviews)
List Price : $32.99
Our Price : $24.99
|
|
| |
-
Drill Guide that can be used in horizontal, vertical or angle positions
-
Guide-bars themselves have springs for a quick return when doing repetitive drilling
-
Drill adapter itself slides up and down on guide-bars
-
Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place
-
Fits all 1/4-inch or 3/8-inch drills
|
|
| |
|
Product Description |
Now you can achieve drill press precision with your hand drill. Perfect for working on the job site. Guide attaches directly to 3/8" drill chuck. Maximum 6000 RPM.
|
| |
|
Jas-store.com Product Description |
|
The Wolfcraft Drill Guide can be used in horizontal, vertical or angle positions, and fits all 1/4-inch or 3/8-inch drills. The Guide-bars themselves have springs for a quick return when doing repetitive drilling, while drill adapter itself slides up and down on guide-bars. Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place while drilling. The guide also includes spring loaded depth stops. |
| |
|
| |
|
Better than drilling by hand, but not by much |
I read the existing reviews on this items and have to concur. The overall sturdiness suffers due to the plastic nuts and washers securing the rods to the the base. I removed and discarded the supplied tension springs because they required an insane amount of force to compress.
I bought this drill guide as part of a bathroom remodel to make holes in the wall and floor for a pedestal sink. The guide worked like a charm when drilling straight down into the floor. But it was awkward to hold securely when drilling into the wall. The plastic handle that screws into the base was flimsy and I had no faith in relying on it. I felt much more safe pressing the base against the wall with my hand, which was awkward.
It did in a pinch and was acceptable for the money, given that I do not foresee any immediate future need for it. |
| |
|
DON'T EXPECT MIRACLES |
|
This was purchased specifically to put holes in round stock. The vees were not deep enough to hold 1" stock securely, but it sort of worked. However, the chuck was not centered over the vees, so holes were off position. The slide/chuck assembly has so much play it was not possible to hit a mark within +/- 1/4". I could have done much better without it. In short, this will not deliver anything close to an accurate perpendicular hole in anything. |
| |
|
It will hold the drill in a pinch |
|
The drill guide worked just well enough for what I needed to do. The drill bit does wobble a little bit on the rails since they are a little too small, so delicate work is not recommended. I used it to drill some plugs for filling screw holes, and it worked as long as I did not drill too deep. If I let the bit get too far the play between the bit and the frame was enough that the bit broke the plug while drilling. I would imagine with hole drilling it would be somewhat the same and a small drill bit may break. If I had space I would buy a full-size drill press but attaching this to a piece of wood worked for now. |
| |
|
Works well, especially for the price. |
|
I used it with my Ryobi 110v and my Bosch LiOn, and it worked well each time. The springs are a little stiff, but removable, which I considered but didn't do. The chuck is fairly cheap and loosened once (I tightened it as tight as my fingers on the key allowed) but all in all, a good product that did the main thing I needed: allow me to drill holes that are highly perpendicular to the surface. |
| |
|
Just as represented. |
|
Every thing it was supposed to be. A great little handy aid in aligning your drill for a perfect job. |
| |
