| Subcategories |
 |
Accessories |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-track
Studio : E. Emerson Tool Co
by E. Emerson Tool Co
Brand : E. Emerson Tool Co
Model : A-50
Publisher : E. Emerson Tool Co
Availability : Usually ships in 1-2 business days
EAN : 0894837000032
UPC : 894837000032
Avg. Customer Rating: (based on 28 reviews)
List Price : $44.99
Our Price : $29.76
|
|
| |
-
T-track accepts all the accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs
-
T-track accepts all accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs etc.
-
All in one clamps are all the same height the thickness matches 3/4 plywood
-
Scale ruler available in metric or inch
-
Jaws holes accept accessories:tall jaws wide jaws story sticks
|
|
| |
|
Product Description |
|
The Single Clamp is a simple and straight forward tool. Most commonly used as a straight edge guide for making clean cuts with your circular saw and router. Other uses include but not limited to; a fence for a table saw and drill press. |
| |
|
Jas-store.com Product Description |
|
The E. Emerson Tool Company A-50 All-in-One 50-Inch Grip Clamp Guide uses edge to edge clamps that are quickly adjustable and low profile, unobtrusive jaws to secure wood while staying out of your way. The tall, wide jaws provide flexibility, and the jaw holes accept steel jaw teeth for use on steel tables, and the scale ruler can be used for metric or inch measurements. The built-in T-track accommodates all manner of accessories, such as router plates, stop blocks, and jigs. The clamp thickness matches 3/4-inch plywood sheets, and a micro-adjustable stop provides superior precision in a tool given 5 stars by Popular Woodworking magazine. |
| |
|
| |
|
Worth the money in the time it saves. |
I purchased this a few weeks ago (from Jas-store) with the wide jaws because of the recommendations here. I agree buy the jaw set, in fact I think they should just be sold as one unit. I am very pleased and did not have any problems using the tool. It sure beats using a board and clamps.
The distance from the edge of my saw's baseplate to the blade is not a nice even number. I made a little story stick (which I tend to misplace between projects) for this as I never remember the setting and would have to re-measure. I know there are many ways to do this but I like to do as few adjustments and measurements as possible. I did not buy the saw guide but was curious if it would eliminate or simplify the alignment step.
I attended a woodworking show this past weekend and the gentleman from Emerson had a booth and was demonstrating the different clamps. I stopped by to see if they had the saw guide. However after watching a few minutes I realized I did not need one, at least to ensure alignment. All you have to do is attach a piece of hardwood to the wide jaws that is wider than the distance to your saws blade and then cut off the excess. You now have an alignment tool calibrated to your saw. I like to think if I used it a few more times I would have thought of that but I give credit where credit is due. But watching the demo gave me many more ideas of how these clamps can save time and increase accuracy in my work. You can make other jigs and attach them to the clamp using inexpensive T-bolts that will fit in the tracks on top. I was so impressed that I bought a few more at the show.
I also learned that Emerson is a small company and I like supporting these types of businesses. And yes when you do deal with a small business sometimes you do run into problems with less than excellent response times. As the owner of one myself (I am the CEO and the guy who takes out the trash) I know all customers are important but you can't always respond the way everyone would like every time. I hope customers understand this and realize that if we don't have these small startup companies we will be missing out on a lot of new an innovating things. I also hope the reviewer who gave the poor rating has resolved the difference and will give them another chance.
|
| |
|
I like the Tru-Grip stuff a bit better |
|
Decent design, but it doesn't always clamp very straight. Therefore, you end up with a less that squarecut. I wouldn't use this for cutting down the length of a door if you're going for square. Decent for the price, though I'd rather pay more for the Tru-grip models. |
| |
|
Best Guide I Ever Bought |
I have been thinking about getting one of these for a long time. I finally ordered the 50" & 24" the 50" came today & it is the best guide I have ever bought. I will definitly get the 99" & 36".
|
| |
|
Good for ripping |
|
This is great for ripping 4'x8' sheets of plywood. Ignore any of the recommended accessories except for the wide jaws. The saw and router guides are really cheap and you really don't need them anyway. |
| |
|
Flexing and other issues |
The product is useful, and speeds up panel cuts (etc), but it is far from perfect.
When cutting a sheet of 4-foot-wide 3/4" plywood, it clamps securely, but the guide can flex significantly if you push too hard in the middle, resulting in a cut that is not straight. The less wide the wood, the less of an issue this is.
I was able to push mine more than the reported 1/16" in the middle when used across a sheet of plywood (4'). To me, ANY amount of flexing is a problem, because it is inevitable that I have to push the tool against the edge while cutting. However, use of the optional tool guides presumably reduces the problem, because when using them you don't have to push against the guide.
Another reviewer suggested clamping a piece of the wood to support the middle of the straight-edge. A good solution, but it takes away from the instant-setup convenience this tool is said to offer.
Years ago I bought an aluminum straight edge called Cutters Edge II. I can't find it in google so I assume it is no longer available. It was substantially more rigid than this one, and it came in two 4' lengths which could be joined together. However, its clamping system was much less convenient than this one.
I have not tried it yet, but I suspect this guide would not work well for very thin sheets, such as plywood less than 1/4". Because the clamps rely on edge-to-edge force, thin sheets have the potential to bow with this kind of clamping force applied.
The All-in-One Clamp Guide seems to be best suited to 90-degree cuts, yet they do not have any means of ensuring that the cut will be square. There is a squaring attachment (wide jaws), but measuring and/or checking with a square will still be required.
I only just learned about the "Ultra" model that is 100 inches long. That's the tool I really need (for ripping sheets), and I wish I had bought it instead. Being wider, it should flex less, however with its longer span, it is more subject to flexing. But it's expensive, and I could easily build my own jig, albeit using clamps that are not as quick to use, but with immeasurable flexing. |
| |
|
|
|
